Sub 70 iron
The Sub 70 659 CB Irons is an iron in 8 options from 22°–49°, RH and LH.
Built against the iron fieldpublished figures only
Where this club lands
The field is every iron in the database that publishes both of the chart's figures — every brand, not just Sub 70.
This set's 7-iron is 35° — 95th percentile, weaker-lofted than 95% of the 889 sets that publish one. The median is 32°.
Loft ladder against the field
Loft at each club in the set over the middle half (p25–p75) of every comparable iron set on record — the busiest rung here is built from 900.
Sub 70 659 CB Ironsmiddle half of the field
A break in the line is a club the set does not publish a loft for — it is never bridged, because joining across a gap would draw a loft the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
The head half
Read the set through
Sub 70 659 CB Irons · 7-iron
- LOFT · X AXIS35°
- 95th percentile — weaker-lofted than 95% of the 889 sets that publish a 7-iron
- LIE · Y AXIS62.5°
- 77th percentile — more upright than 77% of the 889 sets that publish a 7-iron
7-iron field: Loft × Lie
The 7-iron of every comparable iron set on record publishing both loft and lie — 889 of them, binned by density.
Offset
Sub 70 659 CB Irons · 7-iron — the leading edge sits behind the line of the shaft by the published figure, drawn to the scale marked and seen from the toe, which is the one view that shows offset truly: it runs perpendicular to the face, so a picture square to the face would have it pointing at you. The outline is a nominal iron — this database holds no head geometry — so the gap the arrow spans is the only measured thing in the frame. The dashed edge is the median of the 7-iron of 580 iron sets on record that publish one.
Offset through the set, against the field
Sub 70's published offset at each club, over the middle half (p25–p75) of every comparable set on record that publishes one.
Sub 70 659 CB Ironsmiddle half of the field
A break in the line is a club the set does not publish an offset for — it is never bridged, because joining across a gap would draw an offset the manufacturer never stated. Every brand's name for the gap wedge is pooled into one rung, since only 25 of 917 sets publish two of them.
Specifications by option
What this record publishes. Across 8 options: loft, lie, length and head weight on every one.
8 rows, unsorted.
| 22 | 3-iron | RH / LH | 60.5 | 0.187 | 1 | 38.5 | 249 | 0.187 | 4.75 | 39 |
| 24 | 4-iron | RH / LH | 61 | 0.177 | 2 | 38 | 256 | 0.177 | 4.5 | 38.5 |
| 27 | 5-iron | RH / LH | 61.5 | 0.167 | 3 | 37.5 | 263 | 0.167 | 4.25 | 38 |
| 31 | 6-iron | RH / LH | 62 | 0.157 | 3.5 | 37 | 270 | 0.157 | 4 | 37.5 |
| 35 | 7-iron | RH / LH | 62.5 | 0.138 | 4 | 36.5 | 277 | 0.138 | 3.5 | 37 |
| 39 | 8-iron | RH / LH | 63 | 0.118 | 4.5 | 36 | 284 | 0.118 | 3 | 36.5 |
| 44 | 9-iron | RH / LH | 63.5 | 0.098 | 5 | 35.75 | 292 | 0.098 | 2.5 | 36.25 |
| 49 | PW | RH / LH | 64 | 0.079 | 10 | 35.5 | 301 | 0.079 | 2 | 36 |
Head geometry doesn't change with the shaft, so it's stated once. A blank cell means Sub 70 did not publish that figure — we don't estimate.
Sub 70 publishes offset in millimetres; the offset (in) column is that figure converted, and Sub 70's own is in the column beside it.
Sub 70 publishes offset in millimetres. The (in) column is that figure converted at 25.4 mm to the inch, and Sub 70's own millimetre column sits beside it — neither is dropped, so the published figure is always on the page.
Measured against comparable clubs
Where this club's published fitting specs sit among comparable clubs — never how good it is.
| Figure | Published | All irons | Its year | Among its peers |
|---|---|---|---|---|
| Strongest-lofted 7-iron | 35° | =838th of 953 | no release year on record | 26th of 26 Sub 70 irons · =396th of 508 low-handicap irons |
| Most offset at the 7-iron | 0.138" | =182nd of 583 | no release year on record | =6th of 25 Sub 70 irons · 9th of 283 low-handicap irons |
| Widest loft range | 27° | =771st of 1,104 | no release year on record | =17th of 32 Sub 70 irons · =323rd of 508 low-handicap irons |
| Most upright lie | 62.5° | =204th of 941 | no release year on record | =4th of 26 Sub 70 irons · =88th of 505 low-handicap irons |
| Longest | 36.5" | =825th of 894 | no release year on record | =25th of 26 Sub 70 irons · =441st of 466 low-handicap irons |
player level — derived
This iron reads as built for a low-handicap player — our deterministic reading of 7-iron offset 0.138", 7-iron loft 35° (traditional players loft). A design classification, not a rule about who may play it. How the bands are read →
Or go straight to a comparison: vs PXG 0211 XCOR2 Irons | Players Distance Irons · vs XXIO 13 Ladies Irons · vs Titleist 1979-80 Tour Model
More irons
Sub 70 639 CB Irons 20°–44° · 8 options Sub 70 639 MB Irons discontinued 20°–45° · 8 options Sub 70 639 MB Plus Irons discontinued 20°–45° · 8 options Sub 70 649 MB Tour Irons 21°–46° · 8 options Sub 70 649 MB TR Irons 24°–46° · 7 options Sub 70 659 MB Irons 20°–50° · 9 options Sub 70 659 TC Irons 20°–50° · 9 options Sub 70 669 CB Irons 22°–49° · 8 options
Other Sub 70 irons on record. Nothing here is a ranking or a recommendation. Browse every club →
What's on this page
In progress2 of 3 built
2 of 3 parts of this club page are built, and we're filling in the rest.
- Sub 70's own specs, partly built.Taken from Sub 70's product page. We haven't found their full spec sheet for this club yet, so some figures they publish may be missing.
- Published options, built.8 configurations with 6 of the 7 specs an iron can publish.
- Stock shaft, built.Sub 70 names no stock shaft for this club on the sources we hold, so there's nothing to link.
The site is in beta and the database is still being built, so expect gaps. Know something we don't? Help us fill it in — a link to where it's published is worth more than anything else you could send.